American Panel Corporation is a team dedicated to satisfying the industry's most demanding customers - from the smallest family restaurant to the largest institutional projects. And that means giving you walk-in coolers and freezers designed for your specific size, shape and temperature needs. 
It also means delivering a quality product backed by a ten-year warranty. It means ease of installation. In short, it means the most cost-efficient way to solve your cooling requirements.
At American Panel, we all work together to make sure you get the best product possible. Our sales and engineering staff is highly trained to recognize your specific requirements and to design a unit that meets them precisely. Then our production and supervision personnel closely monitor the progress of your job, panel by panel. It's a team effort from start to finish.
We believe our best advertisement is you - our satisfied customer. We all stand ready to meet your every need promptly, professionally and thoroughly.
Our versatility is your key to success. It would be nice if everyone's space requirements were identical. We could make all walk-ins the same size and shape. But in the real world, you often need a creative walk-in to fit a specialized space.
That's why we build walk-ins to the exact size and shape you need. American Panel versatility allows us to fabricate around building columns, stairwells or other obstructions; build L-shaped or angular configurations or to place a walk-in under a lower-than-standard ceiling.
By properly computing heat loads and matching our insulation and refrigeration equipment, we ensure that you get all the cooling or freezing capabilities you need.
Quality comes from extra care in manufacturing. The American Panel construction method is dedicated to zero defects and product longevity.
Ours is perhaps the most thoroughly scrutinized manufacturing process in the industry. From the minute we receive raw materials until the finished product is shipped, everything is inspected continually to assure you of the highest quality walk-in.
Every panel is fabricated and examined individually. All insulation is fully cured to avoid further expansion and to eliminate internal voids. This provides for exceptional panel stability.
In addition, all metal facings, lock locations and tongue-and-groove routs are carefully measured and checked for absolute accuracy.
The result is a top-quality, pre-tested walk-in that fits together precisely and insures a lifetime of dependable service.
Every walk-in is test-assembled before shipping. American Panel goes the extra yard for its customers. Before any walk-in leaves our factory, it is test assembled and inspected. We make absolutely certain that each unit will be easy to assemble at your job site. It's another unique American Panel service that guarantees you'll be completely satisfied. 
No one makes installation simpler than American Panel. We include complete, step-by-step instructions, with every panel clearly identified and keyed to the text and illustrations.
Our cam-action speed locks simplify the process even further. They're all operated by a single hex wrench that comes with the shipment. And factory-applied gaskets require no sealant, silicone or other materials.
It's the easiest, most sensible method in the industry.
Freedom to enlarge -- easily, inexpensively. As your business expands so will your refrigeration needs. When the time is right American Panel will be there to design and implement your desired change. We make our panels modular to allow for easy, cost-efficient expansion.
Simply by adding panels, existing walk-ins can be expanded in length, width and height. Combination units can even be formed. And because of our ease of disassembly, relocation to an alternate site is never an obstacle.
Our exclusive foamed-in place door and frame is provided on each walk-in. Space age materials like our fiberglass reinforced polymer (FRP) door perimeter and frame are used to protect your investment for years to come. FRP is a corrosion proof, impact resistant, non-conductive material that will not absorb moisture. Moreover, it is superior to steel, vinyl, wood or other commonly used door and frame materials.
A complete line of refrigeration equipment to meet your every need. At American Panel you may choose from our complete selection of refrigeration equipment to give you the most efficient and problem-free installation possible. Five different quality-engineered refrigeration systems are available to satisfy any indoor or outdoor application. 
Basic Remote Systems - Sturdy, dependable remote refrigeration systems are available in a complete range of sizes for walk-ins where remote installation is desired. Condensing units may be housed singly or for larger installations mounted on multiple unit racks to allow for easy routine maintenance and servicing.
For ease of installation, Pre-Assembled Remote Refrigeration Systems may be ordered. These systems feature factory-installed accessories and controls prewired to a centrally located handybox or electrical panel.
Prewired, Remote Quick Connect Systems with precharged refrigerant lines are optionally available for indoor and outdoor applications.
Top Quick Connect Systems: Versatile Package Refrigeration Systems are the perfect companions for our walk-ins. They are completely automatic, factory wired, tested and charged with refrigerant. Engineered and balanced for maximum capacity and efficiency, they give more BTU's per dollar than any other system on the market.
Deluxe Pre-assembled units include contol panels, disconnects, and circuit breakers along with all the advantage of our standard pre-assembled remote units.
One of these five systems offers the capacity, simplicity and value you need. It's all part of American Panel's commitment to versatility and customer satisfaction.
A complete range of rugged and thoroughly tested hardware. Every piece of hardware utilized on your walk-in is designed to last and is backed by a full one-year replacement warranty. Only top-line door hardware, thermometers and electrical components are utilized in our construction. All door hinges are chrome plated, oblique-lift and self-closing with off-lift features. Door latches are brush polished aluminum to match the remaining hardware and are supplied with an inside safety-release handle so that the door can be opened from the inside although padlocked from the outside. A chrome 2 1/2-inch dial thermometer and a vapor-proof light with flush-mounted switch are standard on each door frame.
Options and accessories for every application. Every American Panel walk-in is equipped with a full list of standard equipment. But depending upon your application, you may desire to include additional options or accessories. American Panel can provide every item needed for even the most sophisticated of applications.
Standard Construction Features:
|
Vapor-proof light fixture 
Accessories As Shown
- Viewport window
- Non-skid floor strips
- Exterior floor ramp
- Pressure relief vent
- Door rain cap
- Bumper rail
- Light switch (cal-osha)
- Thermometer (digital)
- Locking bar
- Door kick plate
- Outside rain roof
- Padlock Provision
Optional Accessories
 Solid Reach-in Doors Glass Reach-in Doors Special Openings or Offsets Diamond Aluminum Treadplate Floors Corner Trim Strips Closure Panels Above Walk-In Thermal Strip Curtains Extra Vapor-Proof Lights (standard) |
Flourescent Lights Optional Metal Finishes Sliding Door Assemblies Meat Rail Accessories Shelving and Dunnage Racks Audio-Visual Temperature Alarm 2" Thick Floors Corner Guards |